LIVARNO LUX HG00146 Instructions D'utilisation Et Consignes De Sécurité page 9

Ruban led 5m
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Danger to life by
electric shock
Do not use the rope light when
covered or recessed into a
surface.
Interconnection shall be made
only by the use of the supplied
connectors. Any open ends
must be sealed-off before use.
The external flexible cable or
cord of this luminaire cannot
be replaced; if the cord is
damaged, the luminaire shall
be disposed of.
Do not connect this rope light
to another manufacturer's
product.
Check the product for dam-
age before use. Never use a
damaged product.
Only use the product with
the components specified in
these instructions for use.
Verify the available mains volt-
age matches the operating
voltage required by the product
before use (100–240 V∼).
The product is only suited for
use with the included mains
adapter (model no.
YN-24WA120200EU).
Please note that the power
adapter continues to draw a
small amount of power even
if the product is turned off as
long as the power adapter is
plugged into a power outlet.
To switch the product off com-
pletely, unplug the power
adapter from the socket.
Always unplug the mains plug
from the socket before instal-
lation, removal or cleaning.
Do not attach objects to the
product.
CAUTION! RISK OF
OVERHEATING! Do not
operate the product inside
the packaging or rolled up.
Protect the product from sharp
edges, mechanical loads
and hot surfaces.
Do not secure with sharp
staples or nails.
Never expose the product to
high temperatures or moisture
as this could damage the
product.
Never open any of the com-
ponents of the electrical equip-
ment or insert any objects
into the same components.
GB/IE/NI
9

Publicité

Table des Matières
loading

Table des Matières