Before Use; Charging The Product; Use; Using The Product Without A Power Connection - LIVARNO LUX HG01747B Instructions D'utilisation Et Consignes De Sécurité

Baladeuse rechargeable
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
Dispose of the product when the product or the mains adapter
or the car adapter is damaged.
Ensure the cables cannot become damaged by sharp edges or
hot objects. Unwind the cables completely before use.
Protect the product against heat and cold.
Do not attach the folding hook
the product can then morph the shape of the folding hook.
This product may only be charged with the mains adapter
(model no.: SD-G0900500D) or car adapter (model no: YL003)
provided.
Please be aware that while the mains adapter or the car adapter
is plugged in, it uses a small amount of power, even when the
product is not switched on. Unplug the mains adapter or the car
adapter from the socket to stop using it.
The mains adapter
suitable for use with the product.
The illuminant is not replaceable.
If the illuminant fails at the end of its life, the entire product must
be replaced.

Before use

Charging the product

Note: You can recharge the product using a normal household socket
or using your car's cigarette lighter socket.
Note: The fuse of the car adapter
nical data of the fuse must comply with information given in the sec-
tion "Technical data". The fuse may only be replaced by a qualified
electrician.
CAUTION! Do not connect the product to your car's cigarette lighter
socket if the car battery is already old and worn. Doing so could
mean that the car engine will no longer start.
Note: In order to use the product without a mains adapter or a car
adaptor, you need to recharge the batteries before use. The charging
process takes about 3–5 hours. The rechargeable battery is firmly in-
tegrated into the base of the product.
Note: Charge the product for approx. 12 hours prior to first use.
Connect the coaxial power connector on the mains adapter or
the car adapter to the connector socket
Insert the mains adapter into a mains socket or insert the car
adapter into the cigarette lighter socket in your vehicle.
Note: During charging, the LED charging indicator
When charging is complete, the LED charging indicator
green. When the LED charging indicator
adapter
out of the socket or the car adapter
10
rette lighter socket. Disconnect the adapter from the product to pre-
vent the batteries from discharging.

Use

You can secure the product by using the folding hook
magnet
3
Using the product without
a power connection
Fully charge the product as described in the section
"Charging the product".
Press the ON / OFF switch
spotlight
Press the ON / OFF switch
light
and switch on the orientation light
1
14 GB/IE
and car adapter
10
on a flat, ferromagnetic surface.
.
1
to hot objects. The weight of
5
provided are only
11
can be exchanged. The tech-
11
on the product.
7
is green, pull the mains
6
once to switch on the hand
2
again to switch off the hand spot-
2
8
lights up red.
6
lights up
6
from the ciga-
11
or the
5
.

Publicité

Table des Matières
loading

Table des Matières