Installation - Abus AZWG10020 Instructions D'installation Et De Service

The device is supplied with a 2 m long telephone cable with TAE connectors.
The TAE connector in Germany can be plugged directly into a TAE socket of
type N.
This socket can only be a pure analog a/b connection. The 1st
TAE box on your property is nowadays usually the interface to the
public ISDN telephone network or to the public IP-based NGN
!
telephone network. Only downstream of the switching unit or
Caution
private branch exchange is a pure analog a/b connection availa-
ble.
When using the PSTN module, we recommend the device be placed as
close as possible to the telephone connection (to the telephone connection
unit). If this is not possible, you should either use a proper telephone exten-
sion cord or connect the device directly to the telephone connection unit.
(Details can be found later in the section on telephone wiring.)
9.2

Installation

If all conditions are met and you have found a good location, mount the base
plate.
Check whether the supplied wall plugs and screws are suitable for
the surface. Otherwise use wall plugs and screws appropriate for
the existing surface.
Use the base plate as a template to mark the mounting holes. Drill holes at
the marked positions with the diameter appropriate for the wall plugs. Insert
the wall plugs.
Feed the cable through the base plate and fasten the base plate securely to
the surface.
11 UK