Assembling The Hand-Held Steam Cleaner - Cleanmaxx JC-236 Mode D'emploi

Assembling the hand-held steam cleaner

If you would like to use the device as a hand-held steam cleaner, you do not
need the handle bar. Remove the handle bar by pushing the release button (6)
on the handle tube whilst pulling the tube out of the main unit.
Select a nozzle/an adapter:
– Steam nozzle
– Cushion cleaning adapter
– Window cleaning adapter
Steam nozzle:
Cushion cleaning adapter
3. Insert the fl oor cleaning head (12) in the steam vent (14)
on the main unit. If you would like to remove the fl oor
cleaning head, push the release button (11) on the back of
the main unit and pull the fl oor cleaning head off.
4. Attach the fl oor cleaning adapter (13) by placing the fl oor
cleaning head on the plastic ring of the fl oor cleaning
adapter and pushing it fi rmly until it locks into place. If you
would like to remove the fl oor cleaning adapter, put one
foot on the cords of the fl oor cleaning adapter to fi x it in
place and then pull the steam cleaner off.
1. Insert the steam nozzle directly in the steam vent on the
main unit. It must audibly lock into place. If you would
like to remove the steam nozzle, push the release button
whilst pulling the steam nozzle out of the main unit.
2. The steam nozzle can be used on its own or in combina-
tion with the metal or plastic brush.
3. If you would like to use one of the brushes, screw it onto
the steam nozzle (see photo illustrating the example of the
metal brush). To remove it, simply screw the brush back
off.
1. Insert the extension hose in the steam vent on the main
unit. It must audibly lock into place. If you would like to
take the hose off again, hold the release button on the
main unit down and pull the hose out of the main unit.
28