Use As A Hand-Held Steam Cleaner; Cleaning And Care - Cleanmaxx JC-236 Mode D'emploi

6. Now mop the fl oor as you would with a conventional fl oor mop.

Use as a hand-held steam cleaner

Please also read the chapter "Overview of accessories" and "Assembling the device and
attaching accessories" on how to use the individual nozzles and adapters.
1. Select a nozzle (depending on what you would like to clean) and assemble the de-
vice as described in the chapter "Assembling the device", section "Hand-held steam
cleaner".
2. To quickly unwind the mains cord, turn the hook for the cable winder (2) down and
pull the mains cord off.
3. Insert the mains plug in a properly installed socket that is easily accessible.
4. Set the On/Off switch (9) on the main unit to the I position.
5. As soon as the device has reached the operating temperature, the device will emit
steam.
6. Move the adapter slowly back and forth across the surface to be cleaned.
7. If you would like to wash out the cleaning cloth, move the On/Off switch (9) on the
main unit to the 0 position and pull the mains plug out of the socket. Wait a few min-
utes so that the device and cleaning cloth can cool off. Afterwards, you can wash out
the cleaning cloth. Then continue cleaning.
8. If the water tank is empty and no more steam is produced, set the On/Off switch (9)
on the main unit to the 0 position and pull the mains plug out of the socket. Refi ll the
water tank (see chapter "Filling the water tank"). Then continue cleaning.
9. When the cleaning process is complete, move the On/Off switch (9) on the main unit
to the 0 position and pull the mains plug out of the socket. Let the device cool off
completely. Empty the water tank completely before you stow the appliance.
10. Prior to using the device again, the water tank should always be checked for residual
water and be completely emptied if necessary.

Cleaning and care

ATTENTION!
❐ Prior to each cleaning, pull the mains plug out of the socket.
❐ Do not submerge the device in water or rinse it with running water.
❐ Do not use any solvents or aggressive cleaning agents.
3. Immerse the fl oor cleaning head (with the fl oor cleaning
adapter) in the water.
4. Place the fl oor cleaning head in the spin wringer in an up-
right position.
5. Push down the spin wringer foot pedal until no more ex-
cess water is wrung out of the fl oor cleaning adapter.
32