Assembling The Device And Attaching Accessories; Assembling The Fl Oor Cleaner - Cleanmaxx JC-236 Mode D'emploi

Assembling the device and attaching accessories

ATTENTION!
❐ Danger of electrocution! During assembly or disassembly the device must not be
connected to the mains supply and must have cooled off.
Carefully place all accessories on a level surface. As a precautionary measure, set down
a protective foil to prevent any damage to sensitive surfaces.
Assembling the fl oor cleaner
1. First insert the handle tube (1) into the handle tube socket
(7) on the main unit. It must audibly lock into place. To re-
move the handle tube, push the release button on the tube
(6) whilst pulling the tube out of the main unit.
2. Slide the handle (1) into the handle tube (4). It must audi-
bly lock into place. To remove the handle, push the release
button (3) on the handle whilst pulling the handle out of the
handle tube.
27