Use; What To Keep In Mind Before Use; Use As A Fl Oor Steam Cleaner - Cleanmaxx JC-236 Mode D'emploi

2. Fill the water tank with clean tap water or distilled water. Use the enclosed measuring
cup to simplify the fi lling process. Do not fi ll the water tank past the MAX mark.
3. Then put the cap back on the water tank.

Use

ATTENTION!
❐ Each time before using the device, check the fl oor cleaning adapter or the cushion
cleaning cloth as well as the window cleaning cloths for wear. The cleaning cloths
may not be used if they are visibly worn down or exhibit damages!
❐ The steam cleaner should be used exclusively with the cleaning cloths and adapters
specially manufactured for it. Only use the accessories recommended by the man-
ufacturer.
❐ When cleaning, make sure that the fl oor cleaning adapter is fi rmly attached to the
cleaning head to prevent damages to the device or fl ooring.
❐ Never point the steam towards people, animals, plants or equipment containing elec-
tric components (e.g. inside of ovens, refrigerators, switches and lights, microwave
devices etc.).
❐ Caution – Risk of breakage! Never clean cold glass panes (e.g. window panes in
winter) with hot steam. The large temperature difference could cause the glass to
rupture!
❐ Always test the device on a small, inconspicuous area fi rst.
❐ Attention – Scalding hazard! Never touch the cleaning head or one of the device's
accessory adapters while in operation!
❐ The fl oor cleaning adapter, the cushion cleaning cloth, the window cleaning cloths,
the cleaning head and the accessory adapters may still be very hot directly after use.
If you want to remove a cleaning cloth or an adapter, switch the device off and wait
until all parts have cooled off and the device no longer emits any steam.
❐ Always allow the device to cool off completely and empty the water tank before you
stow the device.

What to keep in mind before use

• Please keep in mind that the water residue in the water tank is attributed to testing
of the device.
• The fi rst time you use the device or if you have not used the device for a prolonged
period of time, it may take some time for steam to be produced after being turned on
since the lines in the device have not yet fi lled with water. Steam can only be emitted
once the device has reached its operating temperature and the corresponding device
parts have fi lled with water. For this, press down the steam trigger several times.
Use as a fl oor steam cleaner
It is recommended that you briefl y sweep the fl oor surface with a broom or vacuum it
before using the device.
30