Assembly - Cleanmaxx PC-P003U Mode D'emploi

GB

Assembly

Floor Cleaner
Filling the Cleaning Agent Container
The water and cleaning agent container can be fi lled both just with water and with
a cleaning agent. When you press the spray trigger on the handle, the water or
the cleaning agent is sprayed from the spray nozzle in front of the cleaning foot.
22
1. Flip the handle upwards. It must engage audibly.
2. Attach the cleaning foot to the device. It must engage au-
dibly.
3. Insert the handheld vacuum cleaner (i.e. the motor unit
with the dust container). It must engage audibly.
4. Fill the container for the cleaning agents (see the "Filling
the Cleaning Agent Container" section) and insert it into
the device with the seal cap pointing downwards.
You can now start cleaning the fl oor!
1. Turn the seal cap clockwise.
2. Fill the cleaning agent container with cleaning agent.
3. Place the seal cap back on and twist it shut by turning it
anticlockwise.
4. Insert the cleaning agent container into its holder on the
device with the seal cap pointing downwards.