First Mowing Operation After Initial Installation - Stihl RMI 632 Manuel D'utilisation

9.16 First mowing operation after initial
installation
If completion of initial installation occurs
during an active time, the robotic mower
will begin to mow the mowing area
immediately.
If completion of the initial installation
occurs outside the active time, a
mowing operation can be started by
pressing the OK button. If you do not wish
the robotic mower to mow, select "No".
10. iMow app
The models RMI 632 C, RMI 632 PC can
be operated using the iMow app.
The app is available for the most popular
operating systems in respective app
stores.
Further information is available on
the web.imow.stihl.com/systems/
homepage.
The regulations in the "For your
safety" section apply in particular to
all users of the iMow app. (
Activation:
In order for the app and robotic mower to
be able to exchange data, the machine
0478 131 9942 C - EN
must be activated with the owner's e-mail
address by the specialist dealer. An
activation link is sent to the e-mail address.
The iMow app should be installed on a
smartphone or tablet with an Internet
connection and GPS receiver. The e-mail
recipient is defined as the administrator
and primary user; this person has full
access to all functions.
Keep the e-mail address and
password safe so that the iMow
app can be reinstalled should the
smartphone or tablet be changed
(e.g. if the mobile phone is lost).
Data traffic:
Data transmission from the robotic mower
to the Internet (M2M service) is included in
the purchase price.
Data transmission does not take place
continuously and can therefore take a few
minutes.
The transmission of data from the app to
the Internet will result in costs that must be
borne by the user; these costs will be
determined by the contract with the mobile
phone provider or Internet provider.
GPS protection is only available
without e-mail and SMS notification
without a mobile radio connection
and app.
Main functions of the app:
– Viewing and editing the mowing plan
– Starting mowing
– Switching automatic mowing on and off
– Sending the robotic mower to the
docking station
6.)
– Changing the date and time
Changing the mowing plan, starting
a mowing operation, switching
automatic mowing on and off,
sending the robotic mower home
and changing the date and time can
result in activities that will not be
expected by other people. Affected
people must therefore always be
notified in advance about possible
activities of the robotic mower.
– Calling up machine information and the
location of the robotic mower
11. Menu
11.1 Operating instructions
● Remove the control panel if necessary.
( 15.2)
The control pad (1) serves for navigation in
the menus. Settings are confirmed and
menus opened using the OK button (2).
Menus can be exited again using the Back
button (3).
127