Preparatory Measures - Stihl RMI 632 Manuel D'utilisation

Press and turn the rotary knob (1). It
engages again when released. The
marking (2) indicates the set cutting
height.
The rotary knob can be removed
upwards from the adjustment
element. This design is
implemented for safety reasons: it
ensures that the machine cannot be
lifted and carried by the rotary knob.
9.7 Notes on initial installation
An installation assistant is
available for installation of the
robotic mower. This program
guides you through the entire
initial installation process:
● Setting the language, date and time
● Installing the docking station
● Routing the perimeter wire
● Connecting the perimeter wire
● Linking the robotic mower and docking
station
● Checking installation
114
● Programming the robotic mower
● Completing initial installation
The installation assistant must be worked
through in its entirety. Only then is the
robotic mower ready for operation.
An installation video is available
at the www.stihl.com homepage.
Your STIHL specialist dealer can
provide you with further information
on installing the robotic mower.
The installation assistant is re-
activated following a reset (reset to
factory defaults). (

Preparatory measures:

● Mow the lawn using a conventional
lawn mower prior to initial installation
(ideal grass height 6 cm or less).
● In the case of a hard and dry surface,
water the mowing area lightly in order to
make it easier to drive in the fixing pins.
● RMI 632 C, RMI 632 PC:
The robotic mower must be activated by
a STIHL specialist dealer and assigned
to the owner's e-mail address. (
When navigating through the
menus, follow the instructions in the
"Operating instructions" section.
(
You can select options, menu items
and buttons using the control pad.
You can open submenus and
confirm selections using the
OK button.
Use the Back button to
leave the active menu or
jump one step back in the
installation assistant.
11.17)
If errors or faults occur during the
initial installation, a corresponding
message appears on the display.
(
9.8 Setting the language, date and time
● Pressing any button on the control
panel activates the machine and thus
the installation assistant.
10.)
Select the required display language
and confirm with the OK button.
11.1)
24.)
0478 131 9942 C - EN