VERITAS ALINA Mode D'emploi page 176

EN
2. Before inserting the plug, fill the
iron using the specially provided
measuring cup provided in the
package. Remove the cover and
fill with water.
Note: You can
tap water but if it is very
calcareous, we recommend
mixing the tap water with
distilled water.
use water from dryers,
refrigerators, batteries, air
conditioners or perfumed,
decalcified, pure distilled
water or rainwater as this
will cause premature wear
of the device and degrade
the ironing results.
3. After having refilled the iron,
close the cover, connect the
device with the socket paying
attention to the voltage in the
room where you are located.
Application method of the
iron
1. Using the temperature control
• synthetic and sensitive fibers
•• wool (medium temperature)
••• linen and cotton (high
certainly use
Never
2. When the light on the iron goes
Ironing with steam
In order to iron with steam, it is
necessary to set the temperature
control to position. "
"
" "Selection steam ironing on.
To eject steam, press the button on
the handle of the iron.
16
on the iron, select the type of
fabric which you want to iron.
(low temperature)
temperature)
out, the iron has reached the
desired temperature and you can
start ironing.
"Selection steam ironing off.
"