Télécharger Imprimer la page

Fimap FSM Manuel D'utilisation Et D'entretien page 9

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
Children must be supervised to ensure they do not play with the machine. During the working
of the machine, pay attention to other people and especially to children.
Only use the brush supplied with the machine, or the one supplied by a dealer and/or
Authorised Retailer. The use of other brushes could compromise safety levels.
If the machine is left unattended, it must be protected from any accidental movements.
ATTENTION:
The machine must not be used or kept outdoors in damp conditions or directly exposed to
rain. Do not use the machine is wet, muddy or rough areas.
The machine does not cause harmful vibrations.
Never collect gases, explosive/inflammable liquids or powders, nor acids and solvents! These
include gasoline, paint thinners and fuel oil, which, when mixed with the vacuum air, can form
explosive vapours or mixtures, and also non-diluted acids and solvents, acetones, aluminium
and magnesium powders. These substances may also corrode the materials used to construct
the machine.
If the machine is used in dangerous areas (e.g. petrol stations), the relative safety standards
must be observed. It is forbidden to use the machine in environments with a potentially
explosive atmosphere.
Do not place any liquid containers on the machine.
In the event of a fire, use a powder extinguisher. Do not use water.
Do not knock against shelving or scaffolding, where there is a danger of falling objects. The
operator must always be equipped with the appropriate safety devices (gloves, shoes, helmet,
goggles, etc.).
If the machine does not work properly, check this is not caused by failure to carry out routine
maintenance. Otherwise, ask for intervention of the authorised technical assistance centre.
If you need to replace any components, request the ORIGINAL spare parts from an
Authorised dealer and/or Retailer.
When disposing of consumable materials, observe the laws and regulations in force. When
your machine has reached the end of its long working life, dispose of the materials it contains
in an appropriate manner, and bearing in mind that the machine itself was constructed using
fully recyclable materials.
The machine can be used to clean surfaces approved by the owner or by the legal
representative.
Do not force the machine to collect heavy waste.
Do not clean the machine with steam jets or high pressure cleaning equipment.
Do not leave waste in the collection chamber for long periods of time.
Do not use the machine beyond its operating limits.
Do not use the machine to transfer objects.
Do not transport the machine by pulling it or pushing it on stairs.
Do not transport the machine when the debris hopper is full.
Do not leave the machine under a scorching sun.
Do not use the machine on stairs.
Do not collect accumulations of wires and tapes.
10076791-AA_UM_FSM-ID.indb 9
9
21/02/2018 08:54:00

Publicité

loading