Programmed Cooking - Atag MX4570G Mode D'emploi

USING YOUR APPLIANCE
2
3
W

Programmed cooking

W
Warning
If the setting is not confirmed, the adjustment will automatically be
saved in the appliance's after a few seconds.
Immediate cooking
The programmer should only display the time. It should not be flashing.
• Use the knob to select the required cooking setting.
• Confirm by pressing the knob once.
Adjust the cooking temperature
Your oven will suggest the best temperature for this type of cooking.
• You can still adjust the temperature by pressing and holding the
temperature button.
The temperature flashes in the display.
• Set the temperature, using the knob.
• Press the knob to confirm.
• The BOOST indicator shows the temperature rise inside the oven.
A series of beeps sound when the oven has reached the desired
temperature.
To stop cooking, press the 'STOP' button for a few seconds.
Tip
If you leave the door of your oven open, the oven light turns off after
3 minutes.
Cooking with immediate start and a set cooking time
Select the desired cooking mode and adjust the temperature (see
paragraph: "Instant cooking").
• Press the time button.
The display flashes several times to indicate that a setting may be
entered.
• Using the knob, set the cooking time.
• Press the knob to confirm.
The cooking time starts to count down immediately it is set.
The BOOST indicator shows the temperature rise inside the oven.
The cooking time display stops flashing.
EN 9