Publicité
11
1.
M
EN – Spare wheel set
EN
SPARE WHEEL SET
The spare wheel itself (hereafter simply referred to as the "wheel") is not includ-
2.
The spare wheel itself (hereafter simply referred to as the "wheel") is
ed in the set. This must be ordered from the ŠKODA Original Accessories range
not included in the set. This must be ordered from the ŠKODA Original
using order no. 565 601 011H.
Accessories range using order no. 565 601 011H.
This set can only be used in conjunction with the 18" spare wheel.
This set can only be used in conjunction with the 18" spare wheel.
Component index for the set for 18" spare wheels with order no. 565 601 011H:
L
Component
Component index for the set for 18" spare wheels with order no. 565
093 860G:
Left-hand infill piece
Toolbox
Wheel brace
Right-hand infill piece
Car jack
Toolbox
Car jack crank handle
Wheel brace
Securing strap
Car jack
Clip
Car jack crank handle
Fastening bolt
Securing strap
Mu 2 Nm
Screw
Clip
Floor covering
Fastening bolt
Fitting instructions
Luggage compartment floor pin
Screw
Brief description of how to insert the wheel, the infill pieces and the toolbox
into the spare wheel recess in the floor of the luggage compartment (see
Floor covering
figures).
Fitting instructions
Fig. 3 – First remove the existing floor covering, and then remove the existing
Brief description of how to insert the wheel, the infill pieces and
toolbox from the spare wheel recess.
the toolbox into the spare wheel recess in the floor of the luggage
Fig. 4 – Remove the vehicle tools and parts e.g. towing lug, box with light bulbs,
compartment (see figures).
tool for removing the wheel covers, plastic clip for wheel bolt cover caps, cargo
elements, etc. from the existing box. Place the tool for removing the wheel covers,
Fig. 3 – First remove the existing floor covering, and then remove the
the plastic clip for wheel bolt cover caps, etc. into the box (C). Then place the car
existing toolbox from the spare wheel recess.
jack crank handle (F) and the car jack (E) into the box. Secure the tools with the
Fig. 4 – Remove the vehicle tools and parts e.g. towing lug, box with light
strap (G) and tighten it.
bulbs, tool for removing the wheel covers, plastic clip for wheel bolt
Fig. 5 – First place the left-hand infill piece (A), followed by the right-hand infill
piece (B) and then the box (C) (see arrows) into the vehicle's luggage compartment.
cover caps, cargo elements, etc. from the existing box. Place the tool for
removing the wheel covers, the plastic clip for wheel bolt cover caps, etc.
Fig. 6 – Use the clips (H) (see arrows) to screw down the infill pieces (A) and (B) and
the new box (C). Tighten the clips to 1 Nm.
into the box (C). Then place the car jack crank handle (F) and the car jack
Fig. 7 – Place the wheel (N) into the luggage compartment.
(E) into the box. Secure the tools with the strap (G) and tighten it.
Fig. 5 – First place the left-hand infill piece (A), followed by the right-hand
Fig. 8, 9 – Insert the special fastening bolt and nut (J) into the opening in the spare
infill piece (B) and then the box (C) (see arrows) into the vehicle's luggage
wheel recess. Push the bolt in and turn it 90°. Tighten the nut fully. Then push in
the luggage compartment floor pin (K).
compartment.
Fig. 6 – Use the clips (H) (see arrows) to screw down the infill pieces (A)
Quantity
Item
1
A
1
B
A
1
1
C
1
D
B
1
1
E
C
1
1
F
D
1
1
G
E
1
4
H
1
F
J
1
1
K
G
1
2
L
H
4
1
M
J
1
1
K
1
L
2
M
1
1
Publicité
