Publicité
ENGLISH
OPERATION
• Before operating your new oven make
sure you read and understand this Use
and Care Guide completely.
• When powered on, the buzzer beeps
once, "12:00" flashes on the display,
and counting begins. After 5 minutes of
inactivity, the display turns off, and the
microwave oven enters standby mode.
• The lock can be disabled when the
microwave is first plugged in and the
STOP key is selected. To re-enable the
clock follow clock instructions.
Setting the clock
• Suppose you want to enter the correct
time of day 10:59.
Touch:
1. CLOCK
2.
3. CLOCK or
Note
1. If the numbers entered are not within
the range of 1:00--12:59, the setting will
be invalid until valid numbers are input.
2. During the setting of clock, if "START/+30
SEC" is not pressed or if there is no
operation within 5 minutes, the setting is
invalid.
Stop clear
"STOP/Clear" applies in the following
situations:
1. Erase if you make a mistake during
programming.
2. Cancel timer setting and the signal after
cooking.
Display Shows:
(Current time)
3. Stop the oven temporarily during
cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, press
twice.
Setting the timer
Your microwave oven can be used as a
kitchen timer. You can set up to 99 minutes,
99 seconds. The kitchen timer can be used
while the microwave oven is running.
• Suppose you want to set for three
minutes.
Touch:
1. TIMER
2.
3. TIMER
Note
There are not any other programs during
the kitchen timer.
Time cook
This feature lets you program a specific
cook time and power. For best results,
there are 11 power levels refer to POWER
CHART.
Using lower power levels increases the
cooking time which is recommended for
foods such as cheese, milk and long slow
cooking of meats. Consult cookbook or
recipes for specific recommendations.
• Suppose you want to cook for 2 minutes
at 90% power.
20
Display Shows:
(Time counting down)
Publicité
