Assembly; Description Of Controls; Accelerator; Blade Brake - inventiv NV T17051 TH Manuel D'utilisation

6. ASSEMBLY

WARNING - Unpacking and completing the assembly should be done on a flat and
stable surface, with enough space for moving the machine and its packaging, always
using suitable equipment.
Disposal of the packaging should be done in accordance with the local regulations
in force.
Complete machine assembly following the indications on the instruction sheets enclosed with
each part to be assembled.

7. DESCRIPTION OF CONTROLS

7.1 ACCELERATOR

2
A fixed speed is provided, and therefore no need of a throttle.

7.2 BLADE BRAKE

The blade brake is controlled by the lever (1) which
must be held against the handle for ignition and during
lawnmower operations.
The engine stops when the lever is released.

7.3 ADVANCE LEVER

IOn power-driven models, push the lever (1) toward
the handle for forward movement.
The lawnmower stops moving forward when the lever
is released.
WARNING - To prevent damage to the transmis-
sion, do not pull the machine backwards with the
transmission engaged.
1
6
EN

7.4 CUTTING HEIGHT ADJUSTMENT

The cutting height is adjusted by the levers (1).
1
The four wheels must be adjusted to the same height.
DO THIS WHEN THE BLADE IS STOPPED