Grass Cutting; Preparing The Machine - inventiv NV T17051 TH Manuel D'utilisation

8. GRASS CUTTING

8.1 PREPARING THE MACHINE

NOTE - This machine lets you mow lawn in different ways; before starting work, prepare the
machine based on how the lawn is to be mowed.
DO THIS WHEN THE MOTOR IS OFF.
A) Preparation for mowing and collection in grass-catcher:
– Lift the rear discharge guard (1) and fasten the grass-catcher (2) correctly as shown in the
illustration.
B) Preparation for mowing and rear grass discharge:
– Remove the grass-catcher and check that the rear discharge guard (1) maintains its lowered
position.
– On models with a side discharge: make sure that the side discharge guard 4) is lowered and
blocked by the safety lever (3).
C) Preparation for mowing and mulching (if present):
– L ift the rear discharge guard (1) and fit the deflector cap (5) in the outlet, keeping it slightly
tilted to the right. Fasten it by fitting the two pins (6) into the holes provided until the fastener
tooth (7) clicks into place.
To remove the deflector cap (5), lift the rear discharge guard (1) and push in the middle to
release the tooth (7).
3
4
7 EN