Publicité
e Threading the Lower Looper
Open the looper cover and side cover.
Place the spool of thread on the right side spool pin.
* The points to thread for lower looper are marked
in green.
* A convenient threading chart is placed on the
machine body inside the looper cover.
. Draw the thread through the right side thread
guide from back to front.
* If the thread is coming out from the thread guide
groove, pass the thread through the thread guide
hole again as shown.
(D Thread guide
. Pass the thread through the holes on the right side
of the thread guide plate as illustrated.
(2) Thread guide plate
. Pass the thread through the right side of the
looper thread guide, sliding the thread from left to
right.
(3) Looper thread guide
30
Publicité
