Publicité
GB
IE
Cleaning/maintenance
Have any work that is not
described in these operating
instructions performed by an
authorised customer service
centre. Only use original
parts.
Wear gloves when handling the
blade.
Switch off the apparatus, remove
the ignition key (
for the blades to come to a stand-
still.
General cleaning and
maintenance work
Never spray down the device
with water. There is a risk of
electric shock.
• Always keep the device clean. Use a
brush or cloth for cleaning, but do not
use any cleaning agents or solvents.
• After mowing, remove any plant re-
mains that have become stuck to the
wheels, ventilation opening, ejector
opening and blade area using a piece
of wood or plastic. Do not use any
hard or sharp objects as these could
damage the device.
• Check the device before each use for
obvious defects such as loose, worn or
damaged parts. Ensure that all nuts,
bolts and screws are firmly in place.
• Check the covers and protective devic-
es for damage and correct fit. Replace
these if necessary.
34
10) and wait
Replacing blades
If the blade is blunt, it can be re-sharpened
by a specialist company. If the blade is
damaged or unbalanced, it must be re-
placed.
1. Turn the machine over.
2. Use firm gloves and keep hold of the
blade (23). Use a spanner (SW14) to
turn the blade bolt (24) counter-clock-
wise from the motor spindle (25).
3. Reassemble the new blade (23) in re-
verse order. Make sure that the blade
(23) is positioned correctly (see illustra-
tion
) and that the blade bolt (24) is
tightened.
Storage
Release the tightening levers (2+5) and
fold the upper bar (1) and the lower bar
(3) together so that the device takes up less
space. Make sure not to pinch the machine
cables while doing this.
• Store the device in a dry place out of
reach of children.
• Give the motor time to cool off before
you store the device in an enclosed
space.
• Remove the rechargeable battery
before storing the device for a long pe-
riod of time (e.g. winter storage).
We are not liable for damage cause by
our devices if this is caused by improper
repair, the use of non-original parts or in-
correct use.
Publicité
