Publicité
GB
IE
• Always keep the grass ejector
opening clean and free of de-
bris. Only remove cut material
when the device is at a stand-
still.
• Never leave the device unat-
tended at the workplace.
• Do not work with a damaged or
incomplete device or one which
has been converted without the
permission of the manufacturer.
Never use the device if the pro-
tection equipment or shielding
are damaged, or if the safety
equipment (deflector and/or
grass collection equipment) is
missing.
• Do not overload your device.
Only work within the power
range indicated and do not
modify the controller settings on
the motor. Do not use low-per-
formance machines for heavy
work. Do not use the device for
purposes for which it is not in-
tended.
• Do not use the appliance near
flammable liquids or gases.
There is a risk of fire or explo-
sion if this advice is not heeded.
• Switch the device off, remove
the safety key and take out the
battery. Make sure that all mov-
able parts are stationary:
- whenever you leave the
apparatus unattended and
when it is not being used,
28
- before removing obstructions
or loosening blockages from
the discharge chute,
- before checking or cleaning
the apparatus or performing
any work on it,
- if a foreign object has been
hit by the device. Check for
damage to the apparatus
and carry out the necessary
repairs before switching it on
again and working with it,
• If the apparatus starts to vibrate
excessively, an immediate check
is required.
• Make sure that all nuts, bolts
and screws are properly tight-
ened.
• Inspect the apparatus for any
damage.
• Have any necessary repairs car-
ried out on damaged parts.
• Do not bring your feet or hands
into the vicinity of rotating parts
(or beneath them). Never stand
in front of the grass ejector
opening.
• Always pull the circuit breaker/
ignition key if:
- you leave the apparatus
unattended, before clearing
blockages,
- if you are examining, clean-
ing or working on the appa-
ratus,
- after a collision with a for-
eign object. Immediately
Publicité
