Publicité
lower bar (3) together so that the
device takes up less space. Make
sure not to pinch the machine ca-
bles while doing this.
Mounting the grass
collection box
1. Clip the handle (13c) of the grass col-
lection box (13) into the upper side of
the grass collection box (13).
2. Place the plastic tabs (13a) of the grass
collection box (13) over the grass col-
lection box rods (13b).
Mulch kit
Attaching the mulch kit
1. Remove the grass collection box, if
used.
2. Lift the impact protection.
3. Slide the mulch kit (18) into place. The
bracket (18a) snaps into place.
Removing the mulch kit
4. Push in the bracket (18a) on the mulch
kit and remove the mulch kit (18).
Operation
The device must only be
adjusted when the motor is
switched off and the blade is
stationary. There is a risk of
personal injury.
Switch off the apparatus, remove
the ignition key (
for the blades to come to a stand-
still.
10) and wait
Mounting/removing the
grass collection box
1. To mount the grass collection box (13),
lift the impact protection (4) and sus-
pend the grass collection box (13) from
both receptors.
2. Fold the impact protection (4) over the
grass collection box (13). This will hold
the grass collection box in the correct
position.
3. To remove the grass collection box
(13), lift the impact protection (4) and
remove the grass collection box (13).
Fold the impact protection (4) back
over the device housing (12).
Work may not be carried out
using the device without the
impact protection or grass
collection box. There is a risk
of injury.
Filling level indicator
A level indicator (
the grass collection box (
Filling level indicator open:
Grass collection box empty.
Filling level indicator closed:
Grass collection box filled.
Setting the cutting
height
The apparatus has 7 positions for adjusting
the cutting height:
25/30/38 mm - low cutting height
45/55 mm - medium cutting height
65/75 mm - large cutting height
GB
IE
26) is attached above
13).
31
Publicité
