Publicité
GB
IE
23 Blade
24 Blade bolt
25 Motor spindle
26 Level indicator
Technical specifications
Cordless lawn mower ........ PRMA 40-Li A2
Motor voltage ............... 40 V
Motor current I ................................16 A
Idle speed n
......................... 2900 min
1
Idle speed n
......................... 3300 min
2
Cutting circle ............................. 430 mm
Cut height .. 25/30/38/45/55/65/75 mm
Protection class ....................................III
Protection type .................................IPX1
Weight (without battery
and charger) ............................. 16.2 kg
Grass collection box volume .............. 50 l
Sound pressure level
(L
) ................... 76.2 dB(A); K
pA
Sound power level (L
measured ........ 87 dB(A); K
guaranteed ........................... 89 dB(A)
Vibration (a
) on the upper bar
h
right ................ 0,64 m/s
left .................. 0,56 m/s
Attention! An up-to-date list
of battery compatibility can
be found at:
www.lidl.de/akku
This device can only be operated with
the following rechargeable batteries:
PAP 20 A1, PAP 20 A2, PAP 20 A3.
This type of battery may only be charged
with the following chargers: PLG 20 A1,
PLG 20 A3, PDSLG 20 A1.
24
; (2x 20V)
= 3 dB
pA
)
WA
= 2.33 dB
WA
; K=1.5 m/s
2
2
; K=1.5 m/s
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
-1
assessment.
-1
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
2
2
off and times when it is switched on
but running without any load).
Symbols and icons
Symbols on the equipment:
Caution!
Risk of electric shock!
Read the operating instructions
carefully.
Risk of injury from parts being
thrown up.
Publicité
