Optika Italy B-510 Serie Manuel D'instructions page 56

17. Microphotography
17.1 Use of C-mount cameras
1. Loosen the clamping screw ① on the trinocular port and
remove the dust cap ②. (Fig. 106)
2. Screw the C-mount adapter ③ to the camera ④ and insert
the round dovetail of the C-mount into the empty hole of the
trinocular port, then tighten the clamping screw ①. (Fig. 107)
17.2 Use of reflex cameras
1. Insert the Reflex adapter ① into the relay tube ②.
2. Screw the "T2" ring ③ (not provided) to the reflex adapter.
3. Connect the Reflex camera ④ to the "T2" just installed. (Fig.
108)
4. Mount the other end of the relay tube ② into the empty hole
of the trinocular port, then tighten the clamping screw. (Fig.
106)
• "T2" ring is not provided with the microscope, but is
commercially available.
• While shooting dark specimens, darken eyepieces and
viewfinder with a dark cloth to minimize the diffused light.
• To calculate the
objective magnification * camera magnification * lens
magnification.
• If using an SLR camera, mirror movement may cause the
camera to vibrate.
• We suggest lifting the mirror, using long exposure times
and a remote cord.
magnification of the camera:
Page 56
④
③
①
②
①
F ig. 106 F ig. 106
④
③
F ig. 107 F ig. 107
②
F ig. 108 F ig. 108