Publicité
rIDE 400
Decrease key
Press this key to select functions or decrease function values (time/distance/calories/heart rate/resistance).
Start/Stop key
Press this key to start or stop exercise function.
Reset key
Set the user information for SEX, AGE, H.T (Height), W.T (Weight) for user interface (U0-U4), press
this key to back to the original user interface. When in the workout mode selection interface, press this
key to go back to the main menu. This key can also reset all function values when in Stop Mode.
Increase key
Press this key to select functions or increase function values (time/distance/calories/heart rate/resistance).
FUNCTIONS
TIME: Records total time from 00:00 ~ 99:59 mins. This function can count down the time to 0 when
setting. The function value can be increased or decreased by increments of 1 min.
SPEED: Displays the speed from 0.0 ~ 99.9 MPH.
RPM: Displays the RPM from 0 ~ 15 ~ 999.
WATT: Displays the watts from 0 ~ 999. The setting range for watts is from 10 to 350.
DISTANCE: Records the total distance from 0.00 ~ 99.99 miles. This function can count down the
distance to 0 when setting. The setting range for distance is between 0.0 ~ 99.50 miles. The value for
distance increases or decreases in increments of 0.5 mile.
CALORIES: Records total calories burned from 0 ~ 999 CAL. Counts down the calories to 0. The setting
range for this feature is from 0 ~ 990 CAL. The value increases or decreases in increments of 10 CAL.
TEMPERATURE: Displays current temperature between 32~99℉(0 ~ 60℃) when the console is in
sleep mode.
PULSE: Displays the current pulse rate of 0 ~ 40 ~ 220 BPM. The setting range for this feature is
between 40 ~ 220 BPM. Hold the hand pulse sensors for at least 5 seconds to measure your pulse.
This value is for reference only. It cannot be used as the basis for medical treatment.
HEART SYMBOL:
wave.
Bluetooth function: After the recumbent bike is turned on, turn on the Bluetooth function of your
mobile device to connect with the Bluetooth on recumbent bike (Bluetooth model number: SUNNY).
User can play music from their mobile device.
Fan function: The user can press the fan key to turn the fan on or off.
USB charger: The console comes with a USB charger for user's tablet or smart phone. Plug the cable
into USB port for device charging (USB cable not included).
Automatic startup and shutdown: When the user starts to pedal or presses any key, the console will
automatically start up. The console will turn off if there is no signal input for 4 minutes. Press any key
on the console to turn it on again.
Manual – Recumbent Bike – FitBike – Ride 400 – FFHT027
The symbol will flash fast or slow depending on the user's pulse
24
Publicité
