Publicité
F63 RSE speed
F65
RIO ED T1
F66
RIO ED T2
F67
RIO PH T1
F68
RIO PH T2
F69 Motor brake
Partial opening
F71
time
F91
B1-B2 output
0 = 1200 bps
1 = 2400 bps
2 = 4800 bps
3 = 9600 bps
4 = 14400 bps
5 = 19200 bps
6 = 38400 bps (default)
7 = 57600 bps
8 = 115200 bps
OFF (Default)
P0 = It stops the gate and excludes
automatic closing. Use a control
device to resume movement.
P7 = Reopen while closing (sensitive
edges). Inhibited in the fully closed
position.
OFF (Default)
P1 = Reopen while closing.
P3 = Partial stop. Only with
[Automatic close] activated.
P4 = Obstacle standby.
OFF (Default)
1 = Transformer brake (usable only
on transformers equipped with FR
output)
2 = Brake with inversion thrust when
closing
3 = Brake with inversion thrust when
closing and opening
4 = Brake with inversion thrust when
closing and at closing limit switch
5 = Brake with inversion thrust when
closing, opening and at closing limit
switch
3 to 40 seconds (Default 5)
0 = bistable
1-180 seconds (default 1) =
Monostable
The contact remains closed for 1 to
180 seconds.
Set the remote connection system communication speed
on the RSE port.
Associate one of the available functions with a wireless
safety device.
The function only appears if the RIO CONN
interface board is present.
Associate one of the available functions with a wireless
safety device.
The function only appears if the RIO CONN
interface board is present.
Enable the motor brake.
Adjust the partial opening time.
Confi gure the contact B1-B2.
The function only appears if [F17 - Lock] is set
to OFF.
Publicité
