Publicité
Passage-open
F10
warning light
F14 Sensor type
F16 Thrust
F17 Lock
F18 Additional light
Automatic
F19
closure
0 = Warning light on (default) - The
light stays on when the operator is
moving or open.
1 = Warning light fl ashing - The
warning light fl ashes every half a
second when the passage is opening
and stays on when the passage is
open. The light fl ashes every second
when the passage is closing, and
remains off when the passage is
closed.
1 = Keypad (Default)
0 = Transponder
OFF (Default)
ON
OFF (Default)
1 = Electric lock
4 = Electromagnetic lock
OFF (Default)
1 = Cycle light - The lamp stays on
during the manoeuvre.
The parameter only appears
if an automatic closing time is set
[F19 - Automatic closing].
2 = Courtesy lamp - The light
switches on when a manoeuvre starts
and remains on once the manoeuvre
has fi nished, for the time set under
the function [F25 Courtesy time].
OFF (Default)
From 1 to 180 seconds
It notifi es the user of the operator status.
Choose the type of access device.
Before every opening manoeuvre, the leaves thrust
inwards to release the electric lock.
The function is visible only with the electric lock
active [Function F17 set to 1].
Choose the operation type to associate with the
electromagnetic lock or electric lock.
Choose the operating mode of the lighting device
connected to the output W-EX.
Set the time before automatic closure, once the opening
travel end point has been reached.
The function does not work if any of the safety
devices are triggered when an obstacle is detected,
after a complete stop, during a power outage or if
there is an error.
Publicité
