Publicité
• The product cannot be used to automate any guided part that includes a pedestrian
gate, unless it can only be enabled when the pedestrian gate is secured. • Make
sure that nobody can become trapped between the guided and fi xed parts, when
the guided part is set in motion. • All fi xed controls must be clearly visible after
installation, in a position that allows the guided part to be directly visible, but far
away from moving parts. In the case of a hold-to-run control, this must be installed
at a minimum height of 1.5 m from the ground and must not be accessible to the
public. • If not already present, apply a permanent tag that describes how to use
the manual release mechanism close to it. • Make sure that the operator has been
properly adjusted and that the safety and protection devices and the manual release
are working properly. • Before handing over to the fi nal user, check that the system
complies with the harmonised standards and the essential requirements of the
Machinery Directive (2006/42/EC). • Any residual risks must be indicated clearly
with proper signage affi xed in visible areas, and explained to end users. • Put the
machine's ID plate in a visible place when the installation is complete. • If the power
supply cable is damaged, it must be immediately replaced by the manufacturer or by
an authorised technical support service, or in any case, by qualifi ed staff , to prevent
any risk. • Keep this manual inside the technical folder along with the manuals of all
the other devices used for your automation system. • Make sure to hand over to the
end user all the operating manuals of the products that make up the fi nal machinery.
• The product, in its original packaging supplied by the manufacturer, must only be
transported in a closed environment (railway carriage, containers, closed vehicles).
• If the product malfunctions, stop using it and contact customer services at https://
www.came.com/global/en/contact-us or via the telephone number on the website.
• The manufacture date is provided in the production batch printed on the product
label. If necessary, contact us at https://www.came.com/global/en/contact-us. • The
general conditions of sale are given in the offi cial CAME price lists.
Publicité
