Publicité
treadmill stop running automatically .
3.3 Countdown distance training mode: at the stopping state ,press "MODE" button ,enter setting state, the
distance window flash display , default display 5.0KM ,press SPEED+,-button and amend setting
value ,setting range: 0.5—99.0KM. Press "START" button to startup treadmill ,as the speed 0.8KM/H to
start to run, press SPEED+,- to adjust the speed .When countdown distance is 0.0 ,treadmill stop running
automatically.
3.4 Countdown calories training mode: at the stopping state , press "MODE" button for three times ,enter
the setting state ,the calories window display flash ,default display 100CAL, press SPEED+,-button to
amend setting value ,setting range:20—990CAL. Press "START/STOP" button to startup treadmill , as the
speed 0.8KM/H to start to run, press the SPEED+,- to adjust speed. When Countdown calories is 0,
treadmill will stop running automatically.
3.5 "PUL": it will test the heart rate when your both hands hold the rate sensor. and it will show the data on
the display, heart rate ragne:50-250 per minute.(the data just for reference not medical data)
3.6 Now input program mode, the program mode have P1-P12 in all, please press program key separately
you can choose you desired and the time window will flash.
enter setting state ,the time window display flash, default display 30:00, press The setting range:5—99
minutes SPEED+,- button amend the setting the time .Press "START" button and startup the treadmill.
when the countdown time is 00:00 ,the treadmill stop running automatically .Press speed +,- can change
the program data during running.
3.7 Program list
program
minutes
P1
SPEED
P2
SPEED
P3
SPEED
P4
SPEED
P5
SPEED
P6
SPEED
P7
SPEED
P8
SPEED
P9
SPEED
P10
SPEED
P11
SPEED
P12
SPEED
4. Quick start (manual mode)
4.1. press power switch ,put the safe key to correct place.
4.2 press "START" button, the system into 3 seconds countdown time, the buzzer sounds ,the time display
will show countdown time at the same time .3 seconds later the machine will start to running with 0.8km/h.
4.3 at the running state, press "SPEED+""SPEED-" adjust the speed according to your request.
5. Manual mode
5.1 at the alert state, press "START" button, the machine start to running with 0.8km/h,other display window
start to count data, Press "SPEED +","SPEED-" change the speed.
5.2 at the alert state Press "MODE" button into countdown time, The "TIME" display "30:00" and flash,
press "SPEED+""SPEED-" setting running time, time setting range:5:00-99:00.
5.3 at the countdown time mode, press "MODE" into countdown distance mode, The "DISTANCE" display
Set minutes/ 10 = the time of each level
1
2
3
4
2
4
3
4
2
5
4
6
2
5
4
5
3
6
7
5
3
6
7
5
2
8
6
4
2
6
7
4
2
4
6
8
2
4
5
5
2
3
5
3
2
6
7
4
2
5
5
4
5
6
7
8
3
5
4
2
4
6
4
2
4
5
4
2
8
5
9
6
8
6
7
6
5
9
7
5
4
7
4
2
7
8
6
2
6
5
6
3
3
5
3
6
4
7
4
2
4
6
4
2
- 23 -
9
10
5
3
4
2
3
2
4
3
4
3
4
3
4
2
3
2
3
2
3
3
4
2
3
4
Publicité
