Publicité
1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new tool brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no
liability for damage to the device or caused by the
device arising from:
• Improper handling,
• Non-compliance with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts
• Application other than specified
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100,
DIN 13 / VDE0113 not being observed
Please consider:
Read through the complete text in the operating man-
ual before installing and commissioning the device.
The operating manual is intended to help the user to
become familiar with the machine and take advan-
tage of its application possibilities in accordance with
the recommendations.
The operating manual includes important instructions
for safe, proper and economic operation of the de-
vice, for avoiding danger, for minimising repair costs
and downtimes, and for increasing the reliability and
extending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual package with the ma-
chine at all times and store it in a plastic cover to pro-
tect it from dirt and moisture. They must be read and
carefully observed by all operating personnel before
starting the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards. The required
minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your coun-
try, the generally recognised technical rules relating
to the operation of such machines must also be ob-
served.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
26 | GB
2. Device description (Fig. 1)
1. Hose bracket
2. Table extension
3. Protective cover for saw blade and pre-scorer
4. Saw blade Ø315
5. Suction hose Ø50
6. Pre-scorer Ø120
7. Push stick
8. Fine adjustment of longitudinal stop
9. On/off switch / main saw blade
10. Emergency off (only with pre-scorer)
11. On/off switch / pre-scorer
12. Hand wheel - angle adjustment
13. Hand wheel - height adjustment
14. Height indication window
15. Angle indication window
16. Transverse cutting gauge
17. Push grip
18. Longitudinal stop
19. Engine cover
20. Electrical connection
21. Main switch (4.8 kW only)
22. Open-ended spanner WAF30
23. Locking pin
24. Open-ended spanner WAF19
25. Socket spanner WAF8 (only with pre-scorer)
26. Hexagon spanner WAF5
27. Hexagon spanner WAF4
3. Scope of delivery
• Precisa 6.0 circular table saw - partly assembled
• Saw blade Ø 315
• Longitudinal stop
• Transverse cutting gauge
• Riving knife
• Suction hood
• Suction hood accessories
• Extraction port
• Push stick
• Push grip
• Assembly tool
• Fixed mandrel
• Mounting accessories (enclosed accessories bag)
• Operating instructions
• Pre-scoring saw blade Ø120 (only 1901304903)
4. Special accessories
Sliding carriage, standard, 1400
Sliding carriage, standard, 2000
Foldable table width extension
Table extension
www.scheppach.com
art. no.
5463 0701
5463 0702
5463 0706
79017 00701
Publicité
