Publicité
English
Open the discharge flap (1) and
N
hold it in position.
Hold grass box by the handle (2)
N
and unhook it upwards.
Close the discharge flap (1).
N
Empty the grass box.
N
12
Adjusting Cutting Height
Different cutting heights can be
selected.
Setting
Cutting
height
1
35 mm
2
50 mm
3
63 mm
4
74 mm
5
83 mm
6
90 mm
7
98 mm
Adjusting Cutting Height
To increase cutting height:
Pull cutting height adjustment
N
lever (1) toward rear of mower.
Reduce cutting height:
Pull cutting height adjustment
N
lever (1) toward front of mower.
The selected cutting height is shown.
Connecting Charger to
Power Supply
Power supply (mains) voltage and
operating voltage must be the same.
(1.4 in.)
(2 in.)
(2.5 in.)
(2.9 in.)
(3.3 in.)
Insert the plug (1) in the wall
N
(3.5 in.)
outlet (2).
(3.9 in.)
A self test is performed after the charger
is connected to the power supply. During
this process, the light emitting diode (1)
on the charger lights up green for about
1 second, then red and goes off again.
2
1
1
RMA 460
Publicité
