Publicité
Removing the Mulch Insert
Open the rear discharge cover (1)
N
and hold it in position.
Grip the mulch insert (2) by the
N
handle (3) and take it out of the rear
discharge chute (4).
Close the rear discharge cover (1).
N
Installing the Side Discharge Chute
The mulch insert must be in place when
the side discharge is installed.
4
2
3
Open the side discharge cover (1)
N
and hold it in position.
Line up recesses (2) in side
N
discharge chute (3) below the pin
(4).
Close the side discharge cover (1).
N
RMA 460
Removing the Side Discharge Chute
Open the side discharge cover (1)
N
and hold it in position.
Remove the side discharge
N
chute (2).
Close the side discharge cover (1).
N
1
Mounting the Handlebar
WARNING
Place the machine on a firm and level
surface for the following work.
WARNING
The lower handle, and upper handle,
can be folded down after rotating the
locking knobs. Check that the star knobs
are firmly tightened. Hold the handle at
the highest point with one hand and
rotate the locking knobs. Risk of injury.
WARNING
The upper handle can be folded over by
loosening the star knobs. Hold the
handle at the highest point with one
hand and loosen the star knobs. Risk of
injury.
Assembling the Handle
Unfolding the lower handle
2
1
Rotate the locking knobs (1) 90°.
N
Unfold the lower handle (2).
N
English
90°
9
Publicité
