Relay Configuration Page - Bodet Profil 960 Manuel D'installation

6.5 Relay configuration page

This page is used to define the operation of the relay. It is possible to activate the alarm or illumination
function. The illumination can be remotely programmed (via schedule) in automatic mode.
The illumination can be programmed to operate over a "straddle" period. Example: to activate the
illumination from Monday at 22h to Tuesday at 6h, you should enter 22:00 in the From field and
06:00 in the To field.
The table in the second part of the screen is used to program sunrise and sunset times according
to the solstices (summer and winter). This allows the illumination to be automatically programmed
in astronomical mode.
Astronomical mode allows the illumination to be programmed according to the solstice and a defined
programme step.
Example: programming illumination from 6h30 to 8h30 all year round. Depending on the time of
sunrise and sunset (which depends on solstices) illumination will operate for a short or long period:
- automatic illumination from 6h30 to 8h12 in winter: illumination needed for longer time as
the sun rises later in winter.
- automatic illumination from 6h30 to 6h45 in summer: illumination needed for shorter time
as the sun rises earlier in summer.
The Save buttons save the configuration data entered.
31