Publicité
Green & Yellow = Earth
The appliance is equipped with a pre-connected electricity supply cable without plug.
Separate the wires of the supply cable and connect them in accordance with the
instructions given in the below diagram.
1 The wie which is coloured green and yellow must be connected to the terminal
marked with the letter E (Earth) or with the earth symbol
and yellow.
2 The wire which is coloured blue must be connected to the terminal marked N
(Neutral).
3 The Brown wire must be connected to the terminal marked L (Line).
If the appliance is being connected directly to the electricity mains, an
omnipolar circuit breaker with a minimum opening of 3 mm between
contacts must be fitted between the appliance and the electricity supply in
compliance with the load and current regulations.
The installer must ensure that the correct electrical connection has been
made and that it is fully compliant with safety regulations.
WARNINGS:
Before connecting the appliance to the power supply, make sure that:
Blue = Neutral
220-240V~
EN-10
Brown = LINE
or coloured green
Publicité
