Publicité
HOB
BRACKET
Cautions:
The induction hob must be installed by a qualified authorised person. Never try to
install the appliance by yourself.
Incorrect installation may cause harm and damage to people or property, for which
the manufacturer accepts no responsibility.
The hob must not be installed above refrigerators, freezers, dishwashers or tumble
dryers.
Install the hob away from heat sources such as ovens or direct sunlight.
To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
A steam cleaner must not be used.
ELECTRICAL CONNECTION
Attention!
The hob must be installed by a qualified electrician in line with all local standards
and regulations for electrical wiring.
Before any work on the electrical section of the appliance, it must be disconnected
from the mains.
Connection to a good earth wiring system is absolutely essential.
All supply current and earth conductors must be able to withstand an ambient
temperature of 75°C.
After the hob is installed, the power switch must always be in an accessible position.
The wires in the mains lead are coloured in accordance with the following codes:
TABLE
A
HOB
BRACKET
EN-9
TABLE
B
Publicité
