Publicité
Display icons and their meaning
Error code
E5
Cause
There is a system error.
The temperature is too low.
The temperature is too high.
The battery is half inserted.
Solution
An E1 error code means that your Philips
AquaTrio 9000 series Vacuum Cleaner has a
system error.
To solve this, please try one or both of the
following options:
1. Remove the battery from the appliance
and then reinsert the battery. Then try to
restart the appliance.
2. Disconnect the 3-in-1 handheld from the
appliance and press the on/off button
on the handheld. If you still see the E1 error
on your display, please contact the
Consumer Care Center. If you do not see
the E1 error and the appliance does still not
work, there might be a communication
problem with the tube or nozzle. Please
contact the Consumer Care Center.
Make sure the temperature in the room
where the appliance is used, stored, or
charged is above 5 °C.
Make sure the temperature in the room
where the appliance is used, stored, or
charged is below 35 °C. Do not expose the
device to direct sunlight or high
temperatures (near hot stoves, in
microwave ovens, or on induction cookers).
Batteries may explode if overheated.
Make sure that the battery is inserted
correctly (see 'Assembling the Vacuum &
Mop set-up').
English
39
Publicité
