Publicité
Cleaning the roller brush
1
2
2
1
3 Reconnect the 3-in-1 handheld to the dust bucket. Make sure that you
connect the rear part first, then connect the front part so it locks into place
with a click.
1 Pull down the locking lever on the side of the LED nozzle (1) and slide the
roller brush out of the LED nozzle (2). You can remove entangled hair or
threads from the roller brush by sliding down the roller brush with one hand.
Tip: You can also move one blade of a pair of scissors through the groove
on the roller brush to cut hairs and threads that have become entangled
around the roller brush.
2 Slide the roller brush back into the LED nozzle (1) and push up the locking
lever to lock the roller brush in the LED nozzle ('click').
English
37
Publicité
