Cleaning the AquaSpin nozzle
1
2
1
2
2 Rinse the After-Clean tray under the tap and let it dry before placing it back in
the Storage station.
3 Make sure to always put the After-Clean tray back in the Storage station. The
After-Clean tray is essential to perform the AUTOCLEAN correctly.
1 Turn the microfiber brushes counterclockwise (1) and remove them from the
AquaSpin nozzle (2).
Tip: In case a microfiber brush is difficult to remove, you can use the
cleaning brush handle to unlock the microfiber brush.
2 You can remove entangled hair or threads from the microfiber brushes by
sliding down the microfiber brushes with one hand.
English
27