Publicité
7 S PA R E PA R T S A N D O P T I O N A L A C C E S S O R I E S
7.1 Spare Parts
Wear & Tear Set - SKU 06 02 MM
The Wear Part Set contains all spare parts required to replace the Cooling
Unit.
Cooling Units, 3 pieces - SKU 11 17 / Coolung Unit - SKU 11 18
The Cooling Unit cools down the vapor and thus provides a pleasant
temperature and an optimal aroma. To ensure cleanliness of the Cooling Unit,
it should be replaced regularly. The Mouthpiece is included with the Cooling
Unit.
Mouthpieces, 4 pieces - SKU 11 11
Place the Mouthpiece on the Cooling Unit.
Cap Locks, 3 pieces - SKU 11 53
The Cap Lock fixes the Cap to the base of the Cooling Unit.
Screen Set, small - SKU 11 12
The Set contains four Screens with coarse mesh width and two Screens with
normal mesh width.
Coarse Screens, small, 6 pieces - SKU 11 40
The small screen with coarse mesh width is inserted into the base of the
Cooling Unit.
Normal Screens, small, 6 pieces - SKU 11 03
The small screen with normal mesh width is inserted into the Cooling Unit
Cap.
Seal Ring Set - SKU 11 15
The set contains all the sealing rings for the Cooling Unit and Filling Chamber.
Filling Chamber Tools, 5 pieces - SKU 11 59
The various application options of the Filling Chamber Tool are described in
these Instructions for Use.
USB-C Supercharger - SKU 11 47
The USB-C Supercharger enables fast charging of the battery and mains
operation of the Vaporizer when the battery is empty.
7.2 Optional Accessories
Herb Mill - SKU 09 30 / Herb Mill XL - SKU 09 43
The Herb Mill has extra sharp cutting teeth for finely crushed hemp flowers.
Filling Aid - SKU 09 31 MC
The Filling Aid facilitates clean filling of the ground plant material into the
Filling Chamber.
Dosing Capsules, 40 pieces - SKU 09 33 M
Fill the crushed hemp flowers into the Dosing Capsules.
79
© Copyright Gebrauchs.info
Publicité
