CAMPAGNOLO 11 SPEED Mode D'emploi page 18

2.1 - ZERO SETTING of the rear derailleur
WARNING!
Resetting the rear derailleur to zero is a particularly delicate operation and must
be carried out when the bicycle is stationary and placed on a stand. This is why
it should be conducted only and exclusively by a Campagnolo Service Center, a
Campagnolo Pro-shop or a mechanic specialised in mounting EPS groupsets.
2.2 - RIDING SETTING of the rear derailleur
The setting procedure allows to adjust the reference position of the rear derailleur and
is particularly useful if you intend to change the wheel with one with a set of sprockets
that are positioned differently with respect to the drop-out.
To adjust the rear derailleur, press and hold
the MODE button (D - Fig.3) on the EPS
controls for approximately 6 seconds until
the purple LED turns on.
Adjust the position by pressing lever B or
lever C on the left control (Fig. 3).
Note
Every time lever B or lever C (Fig. 3) is pres-
sed, this allows the system to carry out a fixed
shift of approximately 0.2 mm.
When you have completed the procedure,
the system will correct the established posi-
tions of all the chainrings based on the new
settings.
18
A
3
C D
B
ENGLISH