Télécharger Imprimer la page

CAMPAGNOLO 11 SPEED Mode D'emploi page 21

Masquer les pouces Voir aussi pour 11 SPEED:

Publicité

• The life of the components depends on conditions of use and on the frequency
and quality of maintenance. To keep the components in good condition, cleaning
and lubrication must therefore be repeated frequently, especially if it is subjected
to heavy-duty use (i.e. after washing your bicycle, after every ride in wet, dusty or
muddy conditions etc.).
• Dirt seriously damage bicycles and their components. Thoroughly rinse, clean and dry
your bike after using it in these conditions.
• Never spray your bicycle with water under pressure. Pressurized water, even from
the nozzle of a small garden hose, can pass seals and enter into your Campagnolo
components, damaging them beyond repair. Wash your bicycle and Campagnolo
components by wiping them down with water and neutral soap. Dry them using a soft
cloth. Never use abrasive or metal pads.
• Before lubricating, thoroughly clean the drive system (chain, sprocket set, chainrings
and derailleur pulleys) with a brush or cloth saturated with an appropriate degreaser
or detergent.
• Relubricate the components carefully using a lubricant suitable to purpose.
• Using poor-quality or incorrect lubricant may damage the chain and cause excessive
wear or damage to the system. A damaged drive system can malfunction, resulting in
an accident, personal injury or death.
• After applying the lubricant move the cranks and engage all possible gear combina-
tions in order to thoroughly lubricate the entire drive system.
• Thoroughly clean any residual lubricant from the bicycle and floor.
• At the end of the lubrication operation, CAREFULLY degrease rims and brake pads.
WARNING!
Traces of lubricant on the rims and brake pads can reduce or eliminate the braking
capabilities of your bicycle, resulting in an accident, personal injury or death.
ENGLISH
®
®
21

Publicité

loading