CAMPAGNOLO 11 SPEED Mode D'emploi page 19

If the chain is perfectly centred, from the 2nd to the 10th pinion:
the chain moves closer to the lower pinion by moving 3 times downwards
the chain moves closer to the upper pinion by moving 3 times upwards
To save the adjustment, briefly press the MODE button located on the EPS controls
(D - Fig.3).
IMPORTANT!
If you do not press the MODE key briefly, which allows to complete the setting
procedure, the system will automatically exit the procedure after 48 seconds and
will save the new setting.
Every time a resetting to zero is conducted, previous adjustments are reset.
WARNING!
Setting the rear derailleur when the bicycle is in motion may result in dangerous
situations and cause accidents. Therefore please be very careful if you decide to
do it.
3 - REMOVAL
When installing/removing or servicing components, switch off the EPS drivetrain as indi-
cated in the instruction sheet of the EPS Power Unit.
WARNING!
THE EPS REAR DERAILLEUR MUST BE DISASSEMBLED ONLY AND EXCLUSIVELY
BY ONE OF CAMPAGNOLO'S SERVICE CENTERS, A CAMPAGNOLO PRO-SHOP
OR A MECHANIC SPECIALISED IN MOUNTING EPS GROUPSETS.
ENGLISH
19