Publicité
BEHAVIOR
All four Battery Status LEDs
are solid.
When using USB charging,
the Battery Status LEDs
will illuminate to indicate
the level of charge of
the internal battery. The
illuminated LEDs will change
to indicate percentage
of charge as the internal
battery discharges.
The 25% and 50%
Battery Status LEDs blink
alternately with the 50%
and 100% Battery Status
LEDs.
BUTTON FUNCTIONS
POWER BUTTON: Press the
on the power for USB and wireless charging and to check
the battery status. Press and hold 1 second to turn off all
functions.
LIGHT BUTTON: Press and hold the
on the LED light. Press and hold 1 second to turn off the LED
light.
OVERRIDE BUTTON: If the vehicle's battery voltage is too
low for the jump starter to detect, the
allows a manual start.
SMART JUMPER CABLE LED BEHAVIORS
2
1
REASON
The unit is fully charged.
The internal battery is
discharging.
Charging aborted
Power button to turn
Light button to turn
Override button
1. Fault LED
3
2. Clamps Reversed LED
3. Ready LED
4. Override button
4
9
Publicité
