Publicité
• •
50% charged
•
25% charged
2.
To reduce the risk of electric shock, unplug the unit's
charging cable from a USB or wall charger before
attempting any maintenance or cleaning. Simply
turning off the controls will not reduce this risk.
3.
When charging the internal battery, work in a well
ventilated area and do not restrict the ventilation in any
way.
CHARGING THE INTERNAL BATTERY
1.
Use an 18W USB charger (not included), to quickly
recharge the jump starter. Using a charger smaller than
18W will increase charge time.
2.
Plug the USB end of the charging cable into the charger
port. Next, plug the USB end of the charging cable into a
wall adaptor's USB port.
3.
Plug your charger into a live AC or DC power outlet.
4.
The approximate time to fully charge the jump starter (with
an 18W charger):
SL1672: 2-3 hours
SL1673: 2-3 hours
SL1674: 4-5 hours
5.
When the battery is fully charged, disconnect your charger
from the outlet, and then remove the charging cable from
the charger and the unit.
OPERATING INSTRUCTIONS
JUMP STARTING A VEHICLE ENGINE
NOTE: Use model number SA946 jump cable.
IMPORTANT: Do not use the jump starter while charging its
internal battery.
IMPORTANT: Using the jump starter without a battery
installed in the vehicle will damage the vehicle's electrical
system.
NOTE: The internal battery must have a charge of at least
50% to jump start a vehicle.
1.
Turn the vehicle's ignition off.
2.
Plug the battery clamp cable into the jump starter's
output socket.
3.
Lay the DC cables away from any fan blades, belts, pulleys
and other moving parts. Make sure all of the vehicle's
electrical devices are turned off.
11
Publicité
