3
Technical information
3.1 Technical data
System load capacity
Load distribution
Weight
Effective lifting range of
the system
System lift time
System lowering time
Operating pressure
Operating voltage
Motor capacity
Motor speed
Oil pump conveying
power
Pressure relief valve
Filling volume oil container Approx. 14 litres
Noise level
On-site connection
1P~ 230 V
OPI_JUMBO LIFT 4000 NT_V4.1_DE-EN-FR-ES-IT
4,000 kg
Max. 3:1 or 1:3 in or count-
er to the drive-in direction
(Please not the total centre
of gravity of the vehicle)
920 kg
Approx. 2,000 mm
Approx. 30 s with 4,000 kg
load
Approx. 30 s with 4,000 kg
load
Approx. 310 bars
3 x 400 Volt , 50 Hz
3 kW
3000 rpm
3 cm³
Approx. 360 bars
≤ 75 dB(A)
3~/N+PE, 400 V, 50 Hz
with 16 A fuses, slow, ac-
cording to VDE regulations
Power: 2,2 kW
Pump: 1,1 ccm
3.2 Safety devices
• Over-pressure valve
Hydraulic system fuse against over-pressure.
• Check valve
Secure the vehicle against unauthorised lowering of the
load suspension means.
• Two independent cylinder systems (each with
a command, follow system)
Secure against unauthorised lowering of the lift.
• Main switch with locking device
Fuse to prevent unauthorised use.
• Dead man controls
When the button
o
"Lift" or
corresponding movement stops.
• Foot bumper on the lift (optional)
Guard against crushing in the foot area.
• CE-Stop
Guard against crushing in the foot area.
3.3 Data sheet
i
See chapter 3.3 in the
german version for the
diagrams.
3.4 Foundation plans
See chapter 3.4 in the
i
german version for the
diagrams.
3.5 Hydraulic plan
See chapter 3.5 in the
i
german version for the
diagrams.
u
"Lower" is released, the
63