Publicité
BUTTON
4.6.
Water drainage
There are two ways to drain the condensate water in the appliance:
• Manually emptying the water tank;
• Constant water drainage with the water drainage hose.
Emptying the water tank
1.
Press the on/off switch to switch off the device.
Wait three to five minutes for the coolant to reach the correct pressure.
2.
Remove the mains plug from the socket.
3.
Insert the plug into the plug holder.
4.
Place a collection tray under the main drain.
5.
Remove the plug from the main drain.
Water flows from the appliance into the collection tray. Wait until no more water comes out of the appliance.
6.
Put the plug back in the main drain.
Installing the water drain hose
It is advisable to use the water drain hose when a function that dehumidifies the air is selected on the appliance.
1.
Press the on/off switch to switch off the device.
Wait three to five minutes for the coolant to reach the correct pressure.
2.
Remove the mains plug from the socket.
3.
Insert the plug into the plug holder.
4.
Place a collection tray under the main drain.
The water drain hose can be connected in two places: to the main drain or to the secondary drain.
5.
Remove the plug from the main drain or from the secondary drain.
Water can come out of the drain which is collected with the collection tray.
6.
Insert an end of the water drain hose into the drain where the plug has been removed.
7.
Place the other end of the water drain hose in a soil drain or bucket. Make sure that the entire length of the water drain
hose is positioned below the level of the water drain to which it is connected, so that the water can be drained properly.
DESCRIPTION
Sleep function
Press the sleep mode button to activate the sleep function. The sleep mode indicator on
the appliance lights up, the brightness of the LCD screen is lowered and the fan speed is
set to the lowest position.
The sleep function can only be activated if the cooling function is active.
Progress of the cooling function with sleep mode function activated:
• After 1 hour: The temperature increases by 1 °C.
• After 2 hours: The temperature increases by 2 °C.
• After 6 hours: The appliance will automatically switch off.
3
NOTE
Press the sleep mode button to cancel the sleep function.
• Press the oscillation button to automatically move the air outlet louvres up and
down.
• Press the oscillation button twice to turn the oscillation off.
39
Publicité
