Publicité
4.5.
Use of the functions
The functions in the table below can be selected with both the control panel and the remote control.
BUTTON
FUAVE ACB16W24A | ACB18W24A
38
DESCRIPTION
Press the function button several times to select the desired function.
The function indicator of the chosen function lights up:
• Smart function indicator
• Cooling function indicator
• Dehumidification Indicator
• Fan function indicator
Cooling function
The cooling function cools and dehumidifies the room.
1.
Set the desired temperature between 15 °C and 31 °C with the plus and minus
buttons.
2.
Select the desired fan speed using the fan speed button.
3
NOTE
It is recommended not to set the temperature below the outside temperature.
Fan function
The fan function will ventilate the room. The air outlet duct does not need to be
connected for this function.
Select the desired fan speed using the fan speed button.
Dehumidification function
The dehumidification function dehumidifies the room. The fan speed and temperature
cannot be adjusted in this function.
Smart function
The smart function switches between the cooling function and the fan function. The fan
speed and temperature cannot be adjusted in this function.
• The fan function is activated when room temperature is below 24 °C.
• The cooling function is activated when the room temperature is above 24 °C.
Press the plus or minus button to set the temperature or timer time.
Press and hold the plus and minus buttons for three seconds to adjust the temperature
unit.
Press the fan speed button several times to select the desired fan speed.
The fan function indicator of the chosen fan speed lights up.
You can use the timer function in two ways: to turn the appliance on or off over time.
1.
Turn the appliance on.
2.
Select the desired function using the function button.
3.
Select the desired temperature and fan speed.
4.
Only for setting the timer to turn the appliance on: Press the on/off button to turn off
the appliance.
5.
Press the timer button to set the timer. The timer indicator and the number of hours
on the LCD screen will flash.
6.
Press the plus and minus buttons to set the time. The LCD screen displays the time in
hours.
Wait five seconds. The timer indicator stops flashing and lights up. The timer is now
activated.
3
NOTE
Press the timer button or the on/off button to cancel the timer.
Publicité
