Publicité
3.3.3. Preparing the remote control for use
1 1
NOTICE!
Risk of damage to the appliance. When installing the batteries, pay attention to the correct polarity. The orientation of the
positive (+) and negative (−) terminals of the battery must correspond to the + and − on the battery compartment.
1.
Slide the battery cover of the remote control.
2.
Place the batteries in the battery compartment.
3.
Slide the battery cover back onto the remote control.
4.
Use
4.1.
Important information
• Read and follow all the instructions in section 1.Safety.
• Do not use the appliance until installed as instructed!
• Do not leave a working appliance unattended, even for a moment!
• Remember your burglary prevention! After all, the window is open when using the appliance.
4.2.
To effectively use the appliance
The maximum area that this appliance can effectively cool is influenced by various factors.
The following factors may limit the cooling capacity of the appliance, thus reducing the area it can cool:
• a high outside temperature
• direct sunlight in the room
• the presence of many and/or large windows
• a flat roof
• the presence of many people in the room
• the presence of numerous electrical equipment in the room
• insulation of the room
When these factors are less prevalent (so-called low heat loads), the appliance can cool a larger area; conversely, when these
factors are more pronounced (so-called high heat loads), the cooling capacity of the appliance is reduced, limiting the area it
can cool.
To use the appliance as effectively as possible:
• Do not place the appliance near a heat source or in direct sunlight.
• Close doors and windows and keep curtains or shutters closed during the sunniest hours of the day.
• Keep the filters clean.
• Moderate the temperature setting when the room has reached the desired conditions.
FUAVE ACB16W24A | ACB18W24A
36
Publicité
