Technical Specifications; Test Methods; Specifications Table - Alan HM35 Manuel D'utilisation

14 TECHNICAL SPECIFICATIONS

14.1 Test methods

• ETS 300-086 / ETS 300-113 (optional "modem board")
• IEC 529 IP54 and MIL STD 810 C/D/E

14.2 Specifications table

Characteristic
Frequency
Operating Band
Number of Programmable Channels
Channel Spacing
Frequency Steps
Rated Power Supply
Current drain
Antenna Impedance
Speaker Impedance
Frequency Stability
Operating Temperature Range
Relative Humidity
General
Units Value/Measurements conditions
MHz from 136 to 174
MHz 38
- up to 255
KHz 12.5 / 20 / 25
KHz 5 / 6.25
Vdc 12,6 ± 10%
A Stand-by
RX
TX
Ohm 50
Ohm 8
ppm ±5
°C from –25 to +55
% 90 (non condensing)
0.4 (or less)
0.6 @ the maximum AF power
5 (@ 25 W) / 3.5 (@ 10 W) / 2.4 (@ 4 W)
Technical specifications 33