7 USE OF COMMANDS/OPTIONS
7.1 How to navigate the command menu
Refer to the following diagram.
1) Pressing the
button once opens the command menu and di-
splays the five main menus:
• Radio Param – settings/activation of primary radio parame-
ters
• Calls – emission of selective calls
• Scan – performs scanning functions
• Home Chan – recall of home channel (your most frequently
used channel)
• LCD&Keypad – settings for display and keypad
• Switches – activates switching for various options
2) Press the
buttons to scroll through main menus and hi-
ghlight the desired menu.
3) Press the
button to access the menu and view the available
sub-menus.
4) Press
again to scroll through the sub-menus and highlight
the desired one:
• If you have selected an adjustment (e.g. squelch level), press
the
button to access the sub-menu and use the
make changes.
• If you have selected an option with two values (e.g. high or low
output power), you can switch from one value to another by
pressing the
button.
• If you have selected an option (activate or deactivate), a
will appear on the display when the option is activated. Insert/
remove the
symbol by pressing the
• If you have selected a selective call, begin transmission by
pressing the
button.
5) If necessary, confirm the change once more with the
(e.g. in the case of variable selective calls)
6) Exit the sub-menu by pressing the F4/ESC button, then press it
a second time to exit the main menu and return to the standby
screen.
change value of
insert/remove
parameter
(activate/
(Hi or Lo)
deactivate)
to
You can exit the menu/sub-menu at any time, without changing
settings, by pressing the F4/ESC button.
The main menu Home Chan has a sole purpose of recalling the
priority channel; therefore, it does not have a sub-menu.
button.
to access the command menu
to highlight the main menu
to access the highlighted menu
to highlight the sub-menu
access change
send selective
functions
call
to make changes
Use of commands/options
button
15