Summary Table For The Command Menu - Alan HM35 Manuel D'utilisation

7.2 Summary table for the command menu

The following table summarizes the functions of each sub-menu/setting available on your radio.
Each sub-menu/setting will be explained in detail, and its location can be found by referring to the last column of this table.
Main Menu Sub-menu
Radio Param Monitor
Squelch
Power
Lock/Dist
TlkAround
Mic.Sens.
Scrambler
Int.Spkr Off
Calls Call 1
Call 2
User Call
Emergency
16 Use of commands/options
SUMMARY TABLE FOR COMMAND MENU
Brief Description
Temporary exclusion Squelch/CTCSS/selec-
tive calling
Squelch regulation (suppression of back-
ground noise in standby)
Output power setting
Reception sensitivity attenuator
Allows for single-frequency communication at
repeater output (in case of breakdown)
Regulation of microphone sensitivity
Activation of optional scrambler board (if in-
stalled)
Deactivation of internal speaker
Send fixed selective call - Call 1
Send fixed selective call - Call 2
Send variable user-defined selective call
Send Emergency selective call
Type of command or Value available
if monitor is activated
Bar indicator
Hi (high) / Lo (low)
L (activated) / D (deactivated)
if Talk Around is activated
Lo (low) / Hi (high)
if the scrambler is activated
if the speaker is deactivated
Press to send immediately
Press to send immediately
Typing variable digits on the keypad
microphone
Press to send immediately
Par.
6.6
6.5
6.7.c
10.4
10.5
8.1
10.6
8.4
9.2.b
9.2.b
9.2.c
9.2.d